CNC Bed Type Horizontal Milling Machine VH Series: VH450

Bed Type Milling Machine VH Series: VH450
VH Series

VH450

Features

  • The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
  • All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
  • The X, Y axes are protected by stainless steel telescopic covers.
  • The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
  • The spindle runs on precise angular contact bearings.
  • The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
  • All gears in milling head are hardened and precision ground for quiet running.
  • The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
  • The powerful spindle motor gives a high chip removal rate.
  • Choice of Fanuc or Mitsubishi CNC controller.
  • All models can be converted into CNC controlled system.

  • Features
  • Specification
  • Accessories

Features

SPINDLE LUBRICATION SYSTEM
SPINDLE LUBRICATION SYSTEM

Independent chain type magazine features greater flexibility of tool loading. Standard tool loading capacity is 60 tools. Other tool numbers are available upon request.

RUGGED SADDLE RUGGED SADDLE

Massive, scientifically rib reinforced saddle provides rigid support for the table and heavy workpieces.

PRACTICAL TELESCOPIC COVER
PRACTICAL TELESCOPIC COVER

The X,Y axes slideways are protected by telescopic cover to prevent scratching on surfaces from chips, and extend the service life of the machine.

INTEGRATED AUTO LUBRICATINGINTEGRATED AUTO LUBRICATING
VERTICAL AND HORIZONTAL MILLING HEAD
VERTICAL AND HORIZONTAL MILLING HEAD

A combination of vertical and horizontal spindles in a milling head for efficient machining.
When operating with a rotary table, 5 surface machining can be quickly accomplished.
The gears inside the milling head are manufactured from SCM-21, carburized and tempered, then precision ground for heavy duty machining and smooth urnning.
Automatic forced lubrication to the milling head gears ensures minimum gear wear and long service life.

5-SIDE MACHINING IS AVAILABLE
5-SIDE MACHINING IS AVAILABLE

This machine can be fitted withy a rotary table for easy and time saving 5-side machining.

Specification

Model VH450
Table Table size mm 1500x450
X axis travel mm 1100
Y axis travel mm 720
Z axis travel mm 780
T-Slot(width x trough number x pitch) mm 18x3x80
X Feedrate (variable) mm/min 25~1500
Y Feedrate (variable) mm/min 25~1500
Z Axis feedrate (variable) mm/min 25~1500
X Axis Rapid travel mm/min 1500
Y Axis Rapid travel mm/min 1500
Z Axis rapid travel mm/min 1500
Range of cutting reference Cutting length (parameter) mm 1100
Cutting width (parameter) mm 420
Cutting height (parameter) mm 500
Loading weight (parameter) kgs 1000
Spindle (Vertical) Spindle speed R.P.M(60HZ) RPM 45~1500(Variable speed)
Spindle taper   (NT50)
Distance of Spindle nose to table surface mm 0~617
Distance of spindle center to column mm 450
Spindle (Horizontal) Spindle speed R.P.M(60HZ) RPM 45~1500(Variable speed)
Spindle taper   NT50
Distance of Spindle center to table surface   0~780
Distance of spindle nose to table surface   190
Power Spindle motor   10HPx4P AC
X axis feed motor   1 HP x4P
Y axis feed motor   1 HP x4P
Z axis feed motor   1 HP x4P
Packing Dimension LxWxH (after packing) mm 2750x2030x2550
Net weight (before packing) kgs 4200
Gross weight (after packing) kgs 5000

All specifications and designs are subject to change without prior notice.

Standard Accessories:

  1. Automatic lubricating system
  2. Cooling system
  3. Telescopic cover
  4. Tool box
  5. Spindle draw bar screw
  6. Leveling pad
  7. Adjust bolt

Optional Accessories:

  1. Digital readout / linear scale
  2. Ball screw
  3. Air power draw bar
  4. Rotary table