Products Company
Horizontal Machining Center JMH400


(BT40) X630 / Y630 / Z630
    The JMH400 horizontal machining center is equipped with an automatic pallet changer for 2 pallets. The tool cuts the workpiece from the side, allowing the chips to fall from the workbench. There is no need to manually clear the chips on the workbench, effectively improving production efficiency and reliability.

  • The major structural parts are ladle and box type integrated construction to fully overcome the cutting "Blind Rigidity" problem.
  • Three axes are mounted with heavy duty roller type linear guide ways, featuring heavy load resistance and rapid traverse.
  • The structural parts are symmetrical construction combined with "V" shape rib reinforcement that ensures they will remain deformation-free even after a long time.
  • The structural parts are manufactured from high quality cast iron, tempered for stress relier.
  • The advanced finite element andlysis software is applied for simulating structural stress. This assures the best possible machine rigidity, stability and dampening capacity.
Model JMH400
TARVEL Y axis travel 630mm
Z axis travel 630mm
Spindle center to work table surface 50~680mm
Spindle nose to work table center 130~760mm
TABLE Table surface to floor 1100mm
Table size (400 X 400)X 2pcs
T-slot/Bolt Spec 24-M10 X P1.5 X20 mm
Max. loading 400 kg
Divide angle 0.001o
SPINDLE Spindle taper BT-40
Method of spindle DDS
Spindle diameter Φ70
Spindle speed 10000 rpm
FEEDRATE Spindle motor(cont/30 min) 15/18.5 kw(α15)
3-axes cutting feederate 1~10000 mm/min
3-axes rapid feederate 36(48 opt.)
ATC 3-axes min. setting unit 0.001 mm
Tool selection 40 pcs(60 opt.)
Max. tool diameter X length Φ80 X 300
Max. tool weight 10 kg
Tool shank P40T-1 type
Tool change time(t-t) 1.6(60 HZ)
APC Number of pallets 2 pcs
Method of pallet change ROTARY
Pallet change time 8 SEC
OTHER Floor space(L X W X H) 4713 X 3056 X 2735 mm
Machine weight(N.W/G.W) 11500/13500 kg
Power capacity require 40 KVA
Shipment Require(Suggest) 40” HQ

All specifications and designs are subject to change without prior notice.

Standard Accessories:

  1. Rotary type automatic pallet changer
  2. 1o indexing rotary table(JMH-400 std. 0.001o)
  3. Mitsubishi or Fanuc control
  4. 40 tools chain type ATC
  5. BT-40,JNH-400/JMH-500(40):10,000 rpm direct drive
  6. BT-50,JMH-500:6,000 rpm direct drive
  7. BT-50,JMH-630/800/1000:6,000 rpm Japan Gear head
  8. Rigid roller type linear guide way system
  9. Spindle curtain coolant
  10. Spindle oil cooler
  11. Heat exchanger for electrical cabinet
  12. 3 areas powerful chip flushing system
  13. Automatic lubrication system
  14. Fully enclosed splash guard
  15. Chain type chip conveyor with cart
  16. Leveling bolts and pads
  17. Tool box with tools
  18. Operation and maintenance manual
  19. Transformer(Export only) and Export packing

Optional Accessories:

  1. 0.001o or 5o indexing rotary table (JMH-400, 0.001o std.)
  2. 60,90,120 tools chain type magazine
  3. BT-40, 10,000~24,000 rpm direct drive(JMH-400/JMH-500)
  4. BT-50, 8,000~12,000 rpm direct drive(JMH-500)
  5. BT-50, 8,000 or 10,000 rpm direct drive (JMH-630~JMH-1000)
  6. Coolant through spindle(CTS-20/30/50/70 bar)
  7. 3 axes linear scales
  8. Oil skimmer
  9. Air conditioner for electrical cabinet
  10. Automatic tool length measuring device
  11. Automatic workpiece measuring device
  12. Coolant through tool holder 20/50 bar (without tool holder)
  13. CE Standard
  15. Pallet automation system(Flexible Manufacture System
  16. High torque Gear box(JMH-400/JMH-500)
  17. Ball screw coolant system(JMH-630/ MH-800/JMH-1000 std.)
Back List