JY-15
(Auto)X650 / Y360 / Z400
(Manual)X700 / Y360 / Z400
- The main casting part is made of meehanite casting.
- The spindle is one piece machined from SCM440 alloysteel, thermal refining, high-frequency and precision polishing.
- Milling head type:
-Variable (VS) Steps (SS) Inverter (VC)
| 8 Steps |
| 60HZ |
80-120-195-320-570-1040-1680-2700(RPM) |
| 50HZ |
68-115-185-285-400-910-1500-2280(RPM) |
| 16 Steps |
| 50HZ |
2P |
136-230-370-570-1080-1820-3000-4560(RPM) |
| 4P |
68-115-185-285-400-910-1500-2280(RPM) |
-Inverter type used YASKAWA VFD.
- Maximum spindle speed up to 4560rpm/50HZ.
- Used type B belt drive.
- Hardened and ground X,Y axes slideway.
- Turcite-B coated on X Y ways.
- Dovetail slideways.
| Model |
|
Unit |
JY-15VS |
JY-15SS |
JY-15VC |
| Travel |
Longitudinal travel (M./A.) |
mm |
700/650 (Opt. 875/825) |
| Cross travel (M./A.) |
mm |
360 |
| Vertical travel (M./A.) |
mm |
400 |
| Slideway X/Y/Z |
type |
△ / △ / △ |
| Quill travel |
mm |
127 |
| Overarm travel |
mm |
457 |
| Overarm swivel |
degree |
360 |
| Quill swivel (R&L)/(F&B) |
degree |
±45/±45 |
| Dist. from spindle nose to table |
mm |
50-450 |
| Spindle centerline to column |
mm |
60-517 |
| Table |
Dimension |
mm |
1067 x 230 (Opt. 1244 x 230) |
| T-slots (Width x No. x Pitch) |
mm |
16 x 3 x 63 |
| Max. table load |
kg |
200 |
| |
Milling head |
type |
Variable |
8/16 Steps |
Inverter |
| Spindle |
Speed |
60Hz |
rpm |
50-3500 |
80-2700(8) |
55-3600 |
| 50Hz |
rpm |
68-2280(8) |
| rpm |
68-4560(16) |
| |
Vertical feeds |
mm/rev |
0.04/0.08/0.15 |
| |
Taper |
type |
NT 30 or R8 (Opt. NT40) |
| |
Quill Diameter |
mm |
85 |
| Motor |
Main spindle |
HP |
3 |
3 |
5 |
| Machine |
Space(L x W x H) |
mm |
1800 x 2200 x 2150 |
| Packing dimension(L x W x H) |
mm |
1480 x 1600 x 1810 |
| Net Weight |
kg |
900 |
| Gross Weight |
kg |
1000 |
Standard Accessories:
- Draw bar
- Tool box and tools
- Chip cover on Y axis
- Manual lubrication system
Optional Accessories:
- Power drawbar
- Working lamp
- Auto lubrication system
- Power feed(X/Y/Z)
- Gear box(X/Y)
- Servo feed(X/Y)
- Z axis rapid up/down
- Electric box (simple /general /deluxe)
- Ball screw (X/Y)
- 4"/6"/8"(100/150/200mm) riser block
- Digital readout (DRO)
- Coolant system(Pump 1/8 HP)
- Chip tray
