JY-18
(Auto)X700 / Y426 / Z470
(Manual)X800 / Y426 / Z470
- The main casting part is made of meehanite casting.
- The spindle is one piece machined from SCM440 alloysteel, thermal refining, high-frequency and precision polishing.
- Milling head type:
-Steps (SS) Inverter (VC)
| 10 Steps |
| 60HZ |
70-125-190-285-420-600-1025-1530-2200-3350(RPM) |
| 50HZ |
58-110-165-240-360-500-870-1290-1900-2780 (RPM) |
| 20 Steps |
| 50HZ |
2P |
116-220-330-480-720-1000-1740-2580-3800-5560(RPM) |
| 4P |
58-110-165-240-360-500-870-1290-1900-2780 (RPM) |
-Inverter type used YASKAWA VFD.
- Maximum spindle speed up to 5560rpm/50HZ.
- Used type B belt drive.
- Hardened and ground X,Y,Z axes slideway.
- Turcite-B coated on X Y ways.
- Square way design on Y and column slideway.
| Model |
Unit |
JY-18SS |
JY-18VC |
| Travel |
Longitudinal travel (M./A.) |
mm |
850/750 (Opt. 950/850) |
| Cross travel (M./A.) |
mm |
426 |
| Vertical travel (M./A.) |
mm |
470 |
| Slideway X/Y/Z |
type |
△ / □ / □ |
| Quill travel |
mm |
140 |
| Overarm travel |
mm |
540 |
| Overarm swivel |
degree |
360 |
| Quill swivel (R&L)/(F&B) |
degree |
±45/Fixed(Opt.±45) |
| Dist. from spindle nose to table |
mm |
90-560 |
| Spindle centerline to column |
mm |
85-625 |
| Table |
Dimension |
mm |
1270 x 254 (Opt. 1370 x 254) |
| T-slots (Width x No. x Pitch) |
mm |
16 x 3 x 63 |
| Max. table load |
kg |
200 |
| |
Milling head |
type |
10/20 Steps |
Inverter |
| Spindle |
Speed |
60Hz |
rpm |
70-3350(10) |
55-3600 |
| 50Hz |
rpm |
58-2780(10) |
| rpm |
58-5560(20) |
| |
Vertical feeds |
mm/rev |
0.04/0.08/0.15 |
| |
Taper |
type |
NT40 |
| |
Quill Diameter |
mm |
105 |
| Motor |
Main spindle |
HP |
5 |
| Z-axis elevation |
HP |
1/2 |
| Feedrate |
Z-axis speed |
mm/min |
345 |
| Machine |
Space(L x W x H) |
mm |
1920 x 2530 x 2420 |
| Packing dimension(L x W x H) |
mm |
1620 x 1830 x 1960 |
| Net Weight |
kg |
1500 |
| Gross Weight |
kg |
1650 |
Standard Accessories:
- Draw bar
- Tool box and tools
- Chip cover on Y axis
- Working lamp
- Auto lubrication system
- Z Axis Rapid up/down
- Deluxe type operation panel
- Electric box
Optional Accessories:
- Power drawbar
- Power feed(X/Y)
- Servo feed(X/Y)
- Gear box(X/Y)
- Ball screw (X/Y)
- Digital readout (DRO)
- Coolant system(Pump 1/8 HP)
- Chip tray
